Candy EVO 8123D-80 User Manual
![Candy EVO 8123D-80 manual cover](/images/BFQGWtRIvLmaSdKGcbHCTPnj/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the appropriate compartment, close the door securely, select the desired program using the program selector dial, and press the start button.
Ensure that the machine is plugged in and turned on, the door is closed properly, the water supply is on, and the start button has been pressed. If these are all correct, check for any error codes on the display.
Remove the detergent drawer by pulling it out until it stops, then press the release button to remove it completely. Rinse under warm water to remove any residue. Dry it thoroughly before reinserting it into the machine.
Error codes indicate specific issues with the washing machine. Refer to the user manual for a list of error codes and their meanings, along with troubleshooting steps. Common issues include water supply problems, door lock issues, and drainage problems.
To clean the filter, open the filter access panel at the bottom of the machine. Unscrew the filter cover and remove any debris or lint. Rinse the filter under running water and replace it securely before closing the panel.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, ensuring the door seal is free of debris, and running a monthly maintenance wash with a washing machine cleaner to prevent build-up.
Excessive vibration can be caused by an unbalanced load, the machine not being level, or worn-out shock absorbers. Try redistributing the laundry evenly, adjusting the machine's feet, or consulting a technician if the issue persists.
To reduce energy consumption, wash full loads, use cold water settings when possible, and select shorter or eco-friendly washing programs. Regular maintenance also ensures the machine runs efficiently.
Check if the door seal is clean and intact, ensure hoses are securely connected, and inspect for any visible cracks or damage. If the problem persists, consult a qualified technician for assistance.
Before moving the machine, disconnect it from the power supply and water source, secure the drum with transit bolts if available, and ensure the door is locked. Carefully tilt and lift the machine with assistance to avoid damage.