Candy CXSE 7204 User Manual

To set the temperature, locate the control panel inside the refrigerator. Use the temperature control buttons to adjust the settings to your preferred level. The ideal temperature is around 3-5°C (37-41°F) for the fridge and -18°C (0°F) for the freezer.
First, check if the refrigerator is properly plugged in and the power supply is stable. Ensure that the vents inside are not blocked by food items. Clean the condenser coils if they are dirty, and verify that the temperature settings are correct. If the issue persists, contact a service technician.
The Candy CXSE 7204 comes with a frost-free feature, so manual defrosting is not typically required. However, if you notice ice build-up, ensure the door seals are clean and sealing properly.
Some noise is normal, such as humming or clicking. However, if the noise is loud or unusual, check if the refrigerator is level and not touching the wall or other objects. Also, ensure that the interior components are not loose.
The Candy CXSE 7204 does not typically include a built-in water filter. If your model has an external filter system, refer to the manufacturer's instructions for cleaning or replacing the filter.
Check for any obstructions in the door seal, such as food particles or debris. Clean the seals with warm soapy water. If the door is still not closing properly, the seal may need to be replaced.
Ensure that the refrigerator is not overfilled, allowing air to circulate freely. Keep the condenser coils clean and avoid placing the refrigerator near heat sources like ovens or direct sunlight. Also, ensure the door seals are intact and functioning.
To reset the alarm, ensure the door is closed properly and the temperature inside is at the correct setting. If the alarm persists, consult the user manual for specific instructions related to your model.
Store raw meat on the bottom shelf to prevent dripping onto other foods. Keep dairy in the coldest part of the fridge, usually the top shelf, and store fruits and vegetables in the designated crisper drawers. Use the door compartments for condiments and drinks.
To replace the bulb, first unplug the refrigerator. Locate the light cover inside, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.