Candy CVST G382DM-S User Manual
![Candy CVST G382DM-S manual cover](/images/TCuEmAprvZGFdwiTHHAjbkHV/thumbs/thumb175x175.webp)
To reset the Candy CVST G382DM-S washing machine, turn the program selector to the off position. Wait for about 5 seconds, then select a new program. This should reset the machine.
Ensure that the door is fully closed and the power cord is plugged in properly. Check the water supply and make sure the machine is not in pause mode.
To clean the filter, locate the filter access panel typically at the bottom of the machine. Open it and unscrew the filter cap. Remove any debris and rinse the filter under running water before reinserting it.
Error code E03 indicates a drainage problem. Check if the drain hose is kinked or blocked and ensure the pump filter is clean.
Ensure the washing machine is level by adjusting the feet. Also, make sure the laundry load is balanced inside the drum. Avoid overloading the machine.
It is recommended to clean the detergent drawer every month. Remove the drawer and rinse it under warm water to remove any detergent residue.
If the machine is not spinning properly, check if the load is unbalanced or if the drain pump is clogged. Also, ensure that spin speed settings are correctly configured.
To use the delay start function, select your desired wash program, then press the delay start button to set the time you want the wash cycle to begin.
To descale the washing machine, run an empty cycle with a descaling product or a cup of white vinegar. This should be done every 3-6 months to prevent limescale buildup.
Yes, the Candy CVST G382DM-S has a dedicated delicate wash program. Always check the garment care labels and use a suitable detergent for delicate fabrics.