Candy CVS 1745BWDK User Manual
![Candy CVS 1745BWDK manual cover](/images/ciuRZAjPDsgkIEBvXTmLjEWD/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counterclockwise to increase it. Allow 24 hours for the temperature to stabilize after adjustment.
First, check if the refrigerator is plugged in and the circuit breaker hasn't tripped. Ensure the temperature setting is correct. Clean the condenser coils if they are dusty. If the issue persists, contact a professional technician.
The Candy CVS 1745BWDK typically features an automatic defrost system, so manual defrosting is not necessary. If you notice ice buildup, ensure the door seals are tight and not letting warm air in.
Unplug the refrigerator before cleaning. Use a mixture of mild detergent and warm water to wipe down the interior surfaces. Avoid abrasive cleaners. Rinse with a damp cloth and dry thoroughly before plugging it back in.
Check if the drain hole at the back of the fridge is clogged and clean it if necessary. Ensure that food items are not blocking the air vents. If the problem continues, inspect the door seals for damage or wear.
Ensure the refrigerator is level and not touching other appliances or walls. Check for loose items inside the fridge. If the noise persists, it may indicate an issue with the compressor or fan motor, requiring professional assistance.
Keep the refrigerator away from heat sources like ovens or direct sunlight. Ensure the door seals are intact. Avoid placing hot food directly inside. Set the temperature to the manufacturer's recommended setting.
Store raw meats on the lower shelves to prevent drips onto other foods. Use airtight containers to keep odors contained and food fresh. Keep fruits and vegetables in the designated crisper drawers.
Unplug the refrigerator before replacing the bulb. Locate the light cover inside the fridge, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Empty the refrigerator and secure all loose parts. Move the fridge in an upright position to prevent compressor oil from leaking. Secure it with straps and use a dolly for easier handling. Allow it to stand upright for a few hours before plugging in.