Candy CSWS 4752DWE 1-S User Manual
![Candy CSWS 4752DWE 1-S manual cover](/images/KHrUOtTHyypCqCVAYvnErJRC/thumbs/thumb175x175.webp)
To start a drying cycle, load your laundry into the drum, close the door, select the desired drying program using the program selector, and press the start button.
Ensure that the dryer is plugged in and that the circuit breaker is not tripped. Also, verify that the door is fully closed and the start button is pressed properly.
To clean the lint filter, open the dryer door, locate the filter at the bottom of the door opening, pull it out, remove any lint, and replace it securely.
Check if the lint filter is clogged and clean it if necessary. Also, make sure the ventilation duct is not blocked, and ensure the load size is appropriate for the cycle selected.
Regularly clean the lint filter, check and clean the exhaust vent for obstructions, and inspect the drum and door seal for any damage or debris.
Refer to the user manual for a guide on program selection based on fabric type and load size. Use specialized programs for delicates or mixed fabrics.
Unusual noises may be caused by items caught in the drum or filter. Ensure the dryer is level and check for any foreign objects inside the drum or filter area.
It is not recommended to dry shoes in the dryer as they can cause damage to the drum and excessive noise. Consider air drying or using a shoe drying rack if available.
Check if the power supply is interrupted. If the dryer is overheating, it may have a thermal cut-out; allow it to cool down and try restarting the cycle.
To minimize wrinkles, promptly remove clothes from the dryer at the end of the cycle and use a lower heat setting or the anti-crease function if available.