Candy CSW 4852DE 1-80 User Manual

To start a drying cycle, load your laundry into the dryer, close the door, select the desired drying program using the program selector, and press the start button.
If your dryer is not heating up, check if the power supply is intact, ensure the door is properly closed, and inspect the lint filter for blockages. If the issue persists, consider contacting a professional technician.
To clean the lint filter, open the dryer door, remove the filter by pulling it upwards, clean off any lint, and then replace it securely before starting another cycle.
Regularly clean the lint filter, check and clean the condenser unit, and ensure the dryer is placed in a well-ventilated area. Additionally, periodically inspect the power cord and plug for any damages.
Unusual noises may be caused by items in pockets or loose buttons. Check the drum for any loose items and ensure the dryer is level to avoid imbalance. If noise continues, consult a technician.
Yes, you can dry delicate fabrics by selecting a gentle or low-heat drying program specifically designed for delicates. Always check the garment care labels before proceeding.
Ensure there are no obstructions around the door area and that the door latch is clean and undamaged. If the door still does not close, inspect the latch mechanism for wear or damage.
To prevent shrinking, use the appropriate drying cycle for the fabric type, avoid over-drying, and consider air-drying delicate items. Always refer to the garment care labels for guidance.
A slight odor may occur when the dryer is new or if lint buildup is present. However, a strong burning smell could indicate an issue, such as lint blockage or an electrical fault. Stop using the dryer and inspect it or call a technician.
To reset the dryer, disconnect it from the power supply for a few minutes and then reconnect. If the problem persists, refer to the user manual or contact customer support for further assistance.