Candy CSTG 48TM 1-UK User Manual
![Candy CSTG 48TM 1-UK manual cover](/images/OeKwYeEpIAGiSAXUIWlUYfsr/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the appropriate compartment, close the door, select your desired program using the program knob, and press the Start/Pause button.
Ensure the machine is plugged in and the power switch is on. Check that the door is properly closed and that you have selected a program. Also, verify that the water supply is turned on.
Remove the detergent drawer by pulling it out gently. Rinse it under running water to remove any detergent residue. Use a brush if necessary, then dry and reinsert it into the machine.
Ensure the washing machine is level and all four feet are firmly on the ground. Check if the load is balanced, rearrange garments if necessary, and avoid overloading the machine.
Run an empty cycle with a drum cleaner or a mixture of vinegar and baking soda. Select a high-temperature wash to ensure thorough cleaning of the drum.
Check the drain hose for any blockages or kinks. Make sure the filter is clean and that the pump is functioning correctly. Refer to the user manual for instructions on cleaning the filter.
To reset the washing machine, turn off the power by pressing the power button and unplugging it. Wait for a few minutes, then plug it back in and turn the machine on.
Yes, the Candy CSTG 48TM 1-UK offers a quick wash program that allows you to wash a small load in a shorter time. Refer to the program guide to select the appropriate setting.
Use cold water settings whenever possible, ensure full loads are washed, and avoid using the dryer function if you can air dry your clothes. Additionally, opt for eco-friendly washing programs.
Regularly clean the detergent drawer and drum, check and clean the filter, and inspect the hoses for any signs of wear or leaks. Also, run a maintenance wash once a month.