Candy CSTG 262D 1-UK User Manual
![Candy CSTG 262D 1-UK manual cover](/images/sYnkuBudevpMbFyLLxFSwSpn/thumbs/thumb175x175.webp)
To reset the Candy CSTG 262D 1-UK, turn off the machine and unplug it from the power source. Wait for about 5 minutes, then plug it back in and turn it on. This should reset the machine's electronics.
If the washing machine is not spinning, check if the load is unbalanced or too heavy. Redistribute the load and try again. Also, ensure that the drain hose is not clogged and the lid is properly closed.
To clean the detergent drawer, remove it by pulling it out and pressing the release lever. Wash the drawer under running water using a brush to remove any residue. Dry it thoroughly before reinserting it into the machine.
Use a high-efficiency detergent for best results with the Candy CSTG 262D 1-UK. Ensure that the detergent is suitable for front-loading washing machines and follow the manufacturer's dosage instructions.
Check all hoses and connections for leaks or damage. Ensure that the door seal is clean and intact. Also, verify that the detergent drawer is not overloaded, which can cause water to spill out.
Regularly clean the detergent drawer and drum, check and clean the filter, and inspect hoses for any signs of wear or leaks. Run a maintenance wash with a drum cleaning product monthly.
First, ensure that the washing cycle is complete and the machine is powered off. If the door remains locked, unplug the machine for a few minutes and try again. If it still doesn't unlock, consult the user manual or contact a service technician.
Ensure that the washing machine is level by adjusting its feet. Avoid overloading the drum and distribute clothes evenly. Check for any loose items in the drum or filter that might be causing noise.
Ensure that the water supply is turned on and the hose is not kinked. Check the inlet valve filter for blockages and clean it if necessary. Also, verify that the door is properly closed.
Refer to the user manual for guidance on selecting the appropriate washing program based on fabric type and soil level. Use the program selector dial to choose the desired cycle and adjust settings as needed.