Candy CSOW44645TWE 2-S User Manual
![Candy CSOW44645TWE 2-S manual cover](/images/fwABWMOKOxuLRXhCpnCOoWXa/thumbs/thumb175x175.webp)
To start a drying cycle, select the desired program using the program selector knob, adjust the drying time or temperature if needed, and press the start/pause button.
Ensure the dryer is plugged in, the door is properly closed, and the start/pause button has been pressed. If the problem persists, check the fuse or circuit breaker.
To clean the lint filter, open the door, remove the filter from its housing, and clean off any lint. Rinse with water if necessary, dry thoroughly, and replace it before starting a new cycle.
Regular maintenance includes cleaning the lint filter after each use, checking the exhaust vent for obstructions, and wiping the drum and control panel with a damp cloth.
Check if the lint filter is clean and the exhaust vent is clear. Overloading the dryer or using an incorrect drying program can also extend drying times. Consider reducing the load size or adjusting the program settings.
To use the delay start function, select your desired program and press the delay start button until the desired time delay is set. Press the start/pause button to initiate the delay countdown.
Check for foreign objects in the drum or lint filter area, ensure the dryer is level, and verify that the load is balanced. If the noise persists, contact a qualified technician.
Most fabrics can be dried using this dryer, but always check the care label on garments. Delicate fabrics may require a lower temperature or air-dry setting.
Check if the dryer is overloaded, ensure the door is closed properly, and verify that there are no power interruptions. If the problem continues, consult the user manual or contact customer support.
To save energy, dry full loads, use the highest spin speed on your washing machine to reduce drying time, and clean the lint filter after each use. Consider using lower temperature settings for less energy consumption.