Candy CSOW 4855T User Manual
![Candy CSOW 4855T manual cover](/images/SegnGspVtzqfCRttREbubWVG/thumbs/thumb175x175.webp)
To start a drying cycle, first load your laundry into the drum. Close the door securely. Select your desired drying program using the program selector knob. Press the start button to initiate the cycle.
Ensure the dryer is plugged in and the power outlet is functioning. Check if the door is fully closed. Make sure the program is correctly selected and the start button is pressed. If the problem persists, consult the user manual or contact customer support.
To clean the lint filter, open the door and locate the filter at the bottom of the door opening. Pull the filter out, remove any lint by hand or with a soft brush, and then replace it back into its position. Ensure it's secured properly before closing the door.
Regularly clean the lint filter after each use, check and clean the condenser unit monthly, and ensure the water tank is emptied when full. Periodically wipe the drum and exterior with a damp cloth.
This could be due to a clogged lint filter or condenser. Ensure they are clean. Overloading the dryer or selecting the wrong program can also affect drying times. If issues persist, a service check may be required.
Not all fabrics are suitable for tumble drying. Check the care labels on your garments. Delicate items should be dried using a gentle program, while heat-sensitive fabrics should be air-dried.
To reset the dryer, turn it off and unplug it for a few minutes. Plug it back in and turn it on. If the error persists, consult the user manual for specific error code troubleshooting or contact support.
Ensure the dryer is on a level surface and not overloaded. Check for any loose items in the drum or filter area. If noises continue, it may require professional inspection to check for mechanical issues.
After selecting your drying program, press the delay start button to set the desired delay time. The delay can be adjusted in increments (e.g., 1 hour, 2 hours). Once set, press the start button, and the dryer will begin after the delay period.
The condenser unit should be cleaned monthly to ensure optimal performance. Remove it carefully, rinse under running water, and let it dry completely before reinserting it into the dryer.