Candy CSOW 4853TWCE-80 User Manual
![Candy CSOW 4853TWCE-80 manual cover](/images/cTuQWiWZQipLdtsVZiEgACZp/thumbs/thumb175x175.webp)
To reset the dryer, unplug the machine from the power source, wait for about 5 minutes, then plug it back in. This should clear any temporary issues.
Check if the lint filter and exhaust vent are clean. Ensure that the power supply is intact and the settings are correct. If the issue persists, contact a technician.
Open the door and locate the lint filter. Pull it out and remove any lint buildup. Rinse it under warm water if necessary, then dry it thoroughly before reinserting.
Unusual noises can be caused by objects in the drum, worn belts, or motor issues. Check for foreign objects first, then consult a technician if problems continue.
Refer to the user manual for cycle descriptions. Generally, use 'Cotton' for heavy fabrics and 'Synthetic' for lighter ones. Adjust the drying level based on the load.
Regularly clean the lint filter and check the exhaust vent for blockages. Inspect the power cord for damage and ensure the drum is free of debris.
While not recommended due to potential damage to the dryer and shoes, if necessary, use a drying rack or a low heat setting to minimize risks.
Refer to the user manual for a list of error codes and their meanings. Common codes include E03 for drainage issues and E05 for overheating.
This could be due to a clogged lint filter, obstructed exhaust vent, or incorrect cycle selection. Clean and adjust settings accordingly.
Yes, dryer sheets can be used, but do not overuse as they can leave residues. Ensure that the lint filter is cleaned regularly to prevent clogging.