Candy CSO C8DF-80 User Manual
![Candy CSO C8DF-80 manual cover](/images/dxfjIOvoHftOvmYtabmoyVWF/thumbs/thumb175x175.webp)
To clean the lint filter, first ensure the dryer is off. Open the door and locate the lint filter at the bottom of the door opening. Pull it out, remove any lint by hand or with a vacuum cleaner, and replace it securely before using the dryer again.
If your dryer is not starting, check if it is plugged in and that the circuit breaker is not tripped. Ensure the door is closed properly and the start button is pressed. If the issue persists, consider contacting a service technician.
To reduce wrinkles, remove clothes immediately after the cycle ends. Use the anti-crease function if available and avoid overloading the dryer. Consider using a lower heat setting for delicate fabrics.
Error code E03 indicates a drying time error, usually caused by a clogged filter or venting system. Check and clean the lint filter and ensure there are no blockages in the venting system.
To change the drying program, turn the program selector knob to your desired program. Refer to the user manual for details on each program to select the most suitable one for your laundry load.
Regular maintenance includes cleaning the lint filter after each use, checking and cleaning the venting system periodically, and ensuring the water reservoir (if applicable) is emptied.
Improve energy efficiency by using the sensor drying feature, cleaning the lint filter regularly, and avoiding overloading the dryer. Additionally, ensure the dryer is located in a well-ventilated area.
Unusual noises may be due to loose objects or an uneven load. Check for foreign items in the drum, balance the load, and ensure the dryer is level. If noises persist, contact a technician.
It is not recommended to dry shoes in the dryer as it may cause damage to both the shoes and the appliance. Consider air drying or using a dedicated shoe drying rack if available.
To reset the dryer, unplug it from the power source, wait for a few minutes, and then plug it back in. Alternatively, turn off the circuit breaker for the dryer and turn it back on after a few minutes.