Candy CSO 1285TE-S User Manual
![Candy CSO 1285TE-S manual cover](/images/moAhTnRZAvmErJTYWxRtIVaG/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry, add detergent, close the door, select your desired wash program using the program knob, and press the start button.
Ensure the machine is plugged in and switched on. Check the door is closed properly. Verify that you have selected a program and pressed the start button.
Ensure the washing machine is level on the ground. Avoid overloading the drum and evenly distribute the laundry.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter every month and ensure that the inlet hoses are not kinked.
Locate the filter at the bottom of the machine, open the cover, unscrew the filter, remove debris, rinse under tap water, and replace it securely.
Check for blockages in the drain hose or filter. Ensure the drain hose is not kinked and is positioned correctly. Also, verify that the pump is functioning.
Use the correct amount of detergent as suggested by the manufacturer. Ensure that you are using the appropriate type of detergent for your machine and water hardness.
Common error codes include E03 for drainage issues, E04 for water fill problems, and E07 for door lock faults. Refer to the manual for a full list of codes and solutions.
To reset the machine, turn it off, unplug it from the power source, wait a few minutes, then plug it back in and turn it on.
Yes, use the delicate or hand wash program for delicate fabrics. Ensure you follow the garment care labels and do not overload the machine.