Candy CSO 1275T3 1-S User Manual
![Candy CSO 1275T3 1-S manual cover](/images/eaHNbkdZDDPwnKuuPaZrPchf/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired program using the program dial, and press the start button.
Ensure that the machine is plugged in, the door is closed properly, and the water supply is turned on. Also, check if the selected program requires a delayed start.
To clean the detergent drawer, remove it from the machine by pulling it out fully and pressing the release lever. Wash it with warm water and a soft brush to remove any residue.
Run a monthly maintenance wash using a drum cleaner or white vinegar. This helps to prevent mold and remove detergent residue. Always leave the door slightly open after use to allow the drum to dry.
Check if the washing machine is level and adjust the feet if necessary. Ensure the load is balanced and not overloaded. Remove any transit bolts if the machine is new.
Inspect and clean the filter located at the bottom front of the machine. Check for blockages in the drain hose or pump.
Regularly clean the drum and detergent drawer, use the correct amount of detergent, and run a hot wash cycle occasionally. Keep the door ajar between cycles.
Yes, you can wash delicate fabrics by selecting a gentle or delicate program, using a mild detergent, and placing items in a mesh laundry bag.
Refer to the user manual for the specific error code. Most errors can be resolved by checking the door, water supply, and power connection.
Select your wash program first, then use the spin speed button to adjust to the desired level before starting the cycle.