Candy CSE C7LF-S User Manual

To clean the lint filter, open the dryer door and locate the filter at the bottom edge. Pull it out, remove any lint by hand or with a soft brush, and then reinsert it securely.
Check if the dryer is properly plugged in, the door is closed securely, and the selected program is appropriate. Also, ensure that the power supply is functioning correctly.
Use the 'Anti-Crease' function, which periodically tumbles clothes after the cycle ends. Removing clothes promptly after the cycle also helps prevent wrinkles.
Ensure that the lint filter is clean and the venting system is not blocked. Overloading the dryer can also cause longer drying times.
To reset the dryer, unplug it from the power source for a few minutes, then plug it back in and try starting it again.
Regularly clean the lint filter, check and clean the venting system, and inspect the drum for debris. Periodically wipe down the exterior and control panel.
Ensure the lint filter and drum are clean. Occasionally run an empty cycle with a dryer cleaner or a solution of white vinegar and water. Leave the door open between uses to allow air circulation.
It is recommended to use a special drying rack if available. If not, place shoes in a mesh bag or pillowcase and use a low heat setting to avoid damage.
Refer to the user manual for specific error code meanings. Common issues include door not closed properly, filter blocked, or power supply problems.
Select a manual drying program and use the time adjustment buttons to increase or decrease the drying time as needed.