Candy CSC818FX User Manual
![Candy CSC818FX manual cover](/images/vBqbQEfWeiUzlluSTGbsLgdA/thumbs/thumb175x175.webp)
To set the temperature, locate the thermostat dial inside the refrigerator. For optimal cooling, set it to the middle position. Adjust as necessary based on room temperature and load.
Ensure that the door seals are clean and intact. Check that the thermostat is set correctly, and make sure the vents inside the fridge are not blocked by food items.
Manual defrosting is generally required when the frost layer reaches about 1/4 inch thick. This may vary depending on usage and humidity levels.
Use a mixture of mild detergent and warm water to clean the interior. Rinse with clean water and dry with a soft cloth. Avoid abrasive cleaners that could damage surfaces.
Keep the refrigerator full but not overcrowded, maintain good ventilation around it, and ensure door seals are airtight. Avoid placing hot food inside the fridge.
Common causes include uneven placement, items vibrating on top, or the compressor running too hard. Ensure the fridge is level and remove any items on top.
First, unplug the refrigerator. Locate the light cover in the interior, remove it, and unscrew the old bulb. Replace with a new bulb of the same type and wattage.
Regularly clean the condenser coils, check door seals, and ensure proper temperature settings. Also, defrost the freezer as needed and keep the refrigerator level.
Check if the defrost drain is clogged. Clean the drain hole with warm water and ensure that the drip pan is not overflowing.
Ice build-up can occur if the freezer door is not closing properly or if there is an issue with the defrost system. Ensure the door seal is intact and consider checking the defrost timer and heater.