Candy CS4 127TXME 1-S User Manual
![Candy CS4 127TXME 1-S manual cover](/images/QewrcwCiOuNMQThmCNiamOjj/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, close the door, select the desired wash program using the control dial, and press the start button.
Ensure that the machine is plugged in, the door is properly closed, and the water supply is turned on. Check for any error codes on the display and consult the user manual for further troubleshooting.
To clean the detergent drawer, gently pull it out until it stops, then press the release button to remove it completely. Wash the drawer under running water and use a soft brush to remove any residue before re-inserting it.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, wiping the drum and door seal, and running a drum cleaning cycle with a suitable cleaner to prevent limescale build-up.
If the machine is not draining, check for blockages in the drain hose and pump filter. Ensure the hose is not kinked and clean the filter located at the bottom front of the machine by unscrewing it and removing any debris.
The load capacity varies by program. For cotton cycles, the maximum load is typically 7 kg. For synthetics, it is around 4 kg, while delicate cycles usually accommodate up to 2 kg. Refer to the user manual for specific program capacities.
Ensure the washing machine is level and stable. Check that the load is balanced and not too small, as this can cause excessive vibration. Avoid overloading the drum and distribute clothes evenly.
Inspect the door seal for damage or dirt and clean it if necessary. Check all hoses and connections for leaks or blockages, and ensure that the detergent drawer is not overfilled.
Use a high-efficiency (HE) detergent for optimal performance. Powder detergents are recommended for longer washes, while liquid detergents are suitable for shorter cycles. Follow the manufacturer's dosage instructions.
Yes, you can pause a wash cycle by pressing the start/pause button. Wait for the door lock to release before opening the door. Note that some programs may not allow pausing during certain stages.