Candy CS4 1272D3 1-S User Manual
![Candy CS4 1272D3 1-S manual cover](/images/NdFMgrFKdpXLjacfeTJiliRV/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry and add detergent. Turn the machine on using the power button, then select the desired wash program by turning the program dial. Press the start button to begin the cycle.
Check if the machine is plugged in and the power supply is working. Ensure the door is closed properly. If the problem persists, try resetting the machine by turning it off for a few minutes and then on again.
Remove the detergent drawer by pulling it out gently. Rinse under warm water and use a brush to remove any residue. Dry the drawer before reinserting it into the machine.
Ensure the washing machine is level and on a stable surface. Check if the load is balanced and adjust if necessary. Avoid overloading the machine.
Run an empty wash cycle using a drum cleaning detergent or a mixture of vinegar and baking soda, set to a high temperature. This helps to remove residue and odors.
Check the drain hose for blockages and ensure it is positioned correctly. Inspect the filter for clogs and clean if necessary. Ensure the pump is functioning correctly.
Ensure the cycle has ended and wait a few minutes for the door to unlock. If it remains locked, try turning the machine off and back on. Check if the lock mechanism is obstructed.
Regularly clean the detergent drawer, check and clean the filter, inspect hoses for wear, and perform a drum cleaning cycle monthly to maintain optimal performance.
Select the desired wash program and use the temperature control button to adjust the water temperature to your preference. Refer to the manual for specific temperature options.
Inspect the door seal for damage, ensure the detergent drawer is closed properly, and check all hoses and connections for leaks. Tighten or replace any faulty parts.