Candy CS C8LF-80 User Manual
![Candy CS C8LF-80 manual cover](/images/OThGRTHiVCrODwEuNxWEFqoV/thumbs/thumb175x175.webp)
To start a drying cycle, load your laundry into the drum, close the door, select the desired drying program using the program selector dial, and press the start button. Ensure the power is on and that the water tank is empty.
Check if the dryer is properly plugged in and if the circuit breaker is not tripped. Ensure the lint filter is clean and that the venting system is not blocked. If the issue persists, it may require professional servicing.
Open the dryer door and locate the lint filter. Pull it out, remove any lint by hand or with a soft brush, and then replace it securely back into its slot.
Regularly clean the lint filter after each use, check and clean the condenser unit monthly, and ensure the water tank is emptied after each drying cycle. Periodically inspect the venting system for any blockages.
This could be due to a full water tank, an overheated motor, or a blocked vent. Check and empty the water tank, allow the motor to cool, and ensure the venting system is clear.
Refer to the user manual for guidance on the different programs available. Choose the program that best matches the fabric type and drying requirements of your load.
Yes, the dryer has a specific program for delicate fabrics. Use the 'Delicates' setting to ensure gentle drying. Always check garment labels for care instructions before drying.
Unusual noises may be due to loose items in the drum or a misaligned drum. Check for any foreign objects and redistribute the load if necessary. If the noise continues, consult a technician.
To reset the dryer, unplug it from the power source, wait a few minutes, and then plug it back in. This can sometimes resolve minor electronic glitches.
Use the 'Anti-Crease' function if available, remove clothing promptly after the cycle ends, and avoid overloading the dryer.