Candy CS 1271D3 1-S User Manual

To start a wash cycle, first load your laundry and add detergent. Then, select the desired wash program using the program selector knob, adjust any additional settings if necessary, and press the start button to commence the wash cycle.
Ensure that the machine is properly plugged in and that the door is fully closed. Check if the water supply is turned on. If the issue persists, refer to the user manual for specific troubleshooting steps or consider contacting customer support.
To clean the detergent drawer, remove it by pulling it out until it stops, then press down on the release lever and completely remove it. Rinse it under warm water to remove any detergent residue, then dry and replace it.
Run an empty wash cycle with hot water and a cup of white vinegar or a washing machine cleaner to remove any odors or residues. This should be done monthly or as needed.
Excessive vibration can be caused by an unbalanced load, so redistribute the clothes evenly. Ensure the machine is level on the floor and that all transport bolts have been removed if newly installed.
To perform a factory reset, unplug the washing machine from the power supply for a few minutes. Plug it back in and restart the machine. Refer to the manual for more detailed instructions if necessary.
Ensure that the cycle is completely finished. If the door remains locked, wait a few minutes for the machine to cool down. If it still won't open, turn off the machine and refer to the user manual for emergency opening instructions.
To prevent mold, regularly clean the detergent drawer and door seal. Leave the door slightly ajar between uses to allow air circulation, and run a monthly cleaning cycle with a washing machine cleaner.
The Candy CS 1271D3 1-S has a maximum load capacity of 7 kg. For optimal performance and efficiency, avoid overloading the machine and ensure clothes can move freely during the wash cycle.
Refer to the user manual for a list of error codes and their meanings. Follow the suggested troubleshooting steps for each specific code. If the issue persists, consult customer support or a professional technician.