Candy CS 1071D1-S User Manual

To start a wash cycle, first load your laundry and add detergent. Then, select the desired program using the program dial. Press the 'Start/Pause' button to begin the cycle.
Check if the load is balanced as an unbalanced load can cause spin issues. Ensure the 'Spin' program is selected. If problems persist, verify that the drain pump is not clogged.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter monthly. Ensure the machine is level to prevent vibrations.
Locate the filter at the bottom front of the machine. Open the access panel, place a towel underneath, and unscrew the filter cap. Remove debris and rinse the filter under running water before reinserting it.
Check the door seal for damage or debris. Ensure hoses are tightly connected and not cracked. Inspect the detergent drawer for blockages and clean if necessary.
Ensure the washing machine is level on the floor. Avoid overloading the drum and distribute clothes evenly. Check if the transit bolts have been removed if the machine is new.
Common error codes include E03 (drain issue) and E16 (door lock issue). For E03, check and clean the drain filter. For E16, ensure the door is closed properly. Refer to the user manual for more error codes and solutions.
After selecting the desired wash program, press the 'Delay Start' button to set the delay time. Press 'Start/Pause' to activate the delay start feature.
Use a high-efficiency (HE) detergent for best results. The amount depends on the load size and water hardness. Always follow the detergent manufacturer's guidelines.
Leave the door open after each wash to allow air circulation. Regularly clean the detergent drawer and door seal. Use a washing machine cleaner monthly to prevent mold build-up.