Candy CS 1071D1 1-S User Manual

To start a wash cycle, load your laundry, add detergent, select the desired wash program using the control dial, adjust any additional settings, and press the start button.
Ensure the machine is plugged in, the door is properly closed, and the water supply is turned on. Check if the display shows an error code and refer to the user manual for troubleshooting specific codes.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any residue or build-up. Dry it thoroughly before reinserting.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter every few months. Ensure the machine is level to prevent excessive vibration.
Ensure the washing machine is level by adjusting the feet. Avoid overloading the drum and distribute laundry evenly inside the drum.
Check for blockages in the drain hose and clean the pump filter. Ensure the drain hose is not kinked or clogged.
Leave the door open after each wash to allow the drum to dry. Run a maintenance wash with a washing machine cleaner or white vinegar monthly.
Yes, use the dedicated 'Delicate' wash program and a suitable detergent. Place delicate items in a laundry bag to protect them during the wash.
The maximum load capacity is 7 kg for cotton fabrics. Reduce the load for synthetic, wool, or delicate programs to ensure effective cleaning.
Turn the program dial to the 'Off' position, wait for a few seconds, and then select your desired program. Press the start button to resume normal operation.