Candy CO 1482D3-80 User Manual
![Candy CO 1482D3-80 manual cover](/images/GMHkWnoxhPYNLnnMBOZcZGrk/thumbs/thumb175x175.webp)
To reset the Candy CO 1482D3-80 washing machine, turn the dial to the 'Off' position, wait for a few seconds, and then choose the desired program again. This should clear any previous settings.
First, check if the drain hose is kinked or blocked. Ensure that the filter is clean and free from debris. If the issue persists, inspect the pump for blockages.
Remove the detergent drawer by pulling it out and pressing down on the release catch. Soak it in warm, soapy water and use a soft brush to remove any detergent residue before rinsing and replacing it.
Excessive vibration can be caused by an unbalanced load, so try redistributing the laundry. Ensure the machine is level and that all transit bolts have been removed if it was recently installed.
The error code E03 indicates a draining issue. Verify that the drain hose is at the correct height and not blocked, and check the pump filter for any obstructions.
To perform a maintenance wash, run an empty wash cycle at the highest temperature using a washing machine cleaner or a cup of white vinegar to eliminate detergent buildup and odors.
To prevent mold, leave the washing machine door slightly open after each cycle to allow the interior to dry. Regularly clean the door seal and run a maintenance wash every month.
Check if the machine is level and the load is balanced. Inspect the drum for any foreign objects and ensure that the transit bolts have been removed if it was newly installed.
Check that the machine is plugged in and the socket is working. Ensure the door is closed properly, and the water supply is turned on. Also, verify that the selected program has been correctly set.
It is recommended to clean the filter every month to prevent blockages and maintain optimal washing performance. Always ensure the machine is switched off and unplugged before cleaning the filter.