Candy CO 1282D3-S User Manual
![Candy CO 1282D3-S manual cover](/images/YfVGfhFAUNVqwmmUIirceGqk/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry, add detergent, and close the door. Then select your desired program using the program dial, adjust settings if needed, and press the start button.
Check if the drain hose is kinked or blocked. Ensure the pump filter is clean and free from debris. If the problem persists, refer to the user manual or contact customer support.
Remove the detergent drawer by pulling it out and pressing the release button. Rinse each compartment under warm water and use a brush to remove any residue. Dry thoroughly before reinserting.
Regular maintenance includes cleaning the detergent drawer, checking the drum for foreign objects, cleaning the door seal, and running a maintenance wash with a washing machine cleaner every few months.
Ensure the washing machine is level and all four feet are in firm contact with the ground. Also, check that the load is balanced inside the drum. Adjust as necessary and try running the cycle again.
Verify that the washing machine is plugged in and the power outlet is working. Check the door is closed properly and that the start button has been pressed. If the problem continues, consult the manual or seek professional assistance.
After selecting your wash program, press the delay start button to set the desired time delay. Confirm the delay time and press the start button. The machine will start after the set time has elapsed.
Distribute clothes evenly around the drum and mix large and small items. Avoid overloading the machine and try to wash similar types of fabric together to minimize tangling.
Yes, you can pause a wash cycle by pressing the pause button. Once the machine stops, you can open the door if necessary. Press the start button to resume the cycle.
Leave the door open after each wash to allow the drum to dry, regularly clean the door seal and detergent drawer, and perform a maintenance wash with a washing machine cleaner monthly.