Candy CO 1072D3 1-S User Manual
![Candy CO 1072D3 1-S manual cover](/images/GDFaRdrCAFdahqmHrLDnJSNX/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Close the door securely. Turn the program knob to select the desired wash program. Adjust any additional settings as needed, then press the start button to begin the cycle.
If the washing machine does not start, ensure that it is properly plugged into a working power outlet. Check that the door is closed securely. Verify that the water supply is turned on and that the start button has been pressed. If the problem persists, consult the user manual or contact customer support.
To clean the detergent drawer, pull it out gently until it stops. Press the release lever to remove it completely. Rinse the drawer under warm water to remove any detergent residues. Use a soft brush if necessary. Dry thoroughly before reinserting it into the machine.
Excessive noise may be caused by an unbalanced load. Pause the machine and redistribute the laundry evenly in the drum. Check for any foreign objects in the drum or filter. Ensure that the machine is on a flat, stable surface. If noise persists, contact a technician.
It is recommended to clean the filter every month to ensure optimal performance. Always unplug the machine and turn off the water supply before cleaning the filter. Consult the user manual for detailed instructions on accessing and cleaning the filter.
If your washing machine is not draining, check for clogs in the drain hose or filter. Ensure that the drain hose is not kinked or blocked. Clean the filter if necessary. If the issue continues, there may be a problem with the pump, and you should contact a service technician.
To reduce energy consumption, wash full loads whenever possible, use lower temperature settings, and select energy-efficient programs. Regular maintenance, such as cleaning the filter and ensuring the machine is level, can also improve efficiency.
Use high-efficiency (HE) detergents for the Candy CO 1072D3 1-S washing machine. These detergents are designed to produce fewer suds and are more effective for front-loading machines. Ensure to follow the detergent manufacturer’s dosage instructions.
To perform a manual reset, turn off the washing machine and unplug it from the power outlet. Wait for approximately 5 minutes. Plug the machine back in and turn it on. This process can help resolve minor electronic glitches.
If the washing machine is leaking, check the door seal for any signs of damage or foreign objects. Ensure that the detergent drawer is not overfilled. Inspect the water hoses for leaks or loose connections. If the problem persists, consult a professional technician.