Candy CMG3V1BG Instructions Manual
![Candy CMG3V1BG manual cover](/images/rbuuewUQCDnwAHiPoQZxtfBf/thumbs/thumb175x175.webp)
To clean your Candy CMG3V1BG Hob, ensure it is switched off and completely cool. Use a soft cloth with mild detergent and water. Avoid abrasive cleaners and scrubbing pads to prevent damage.
If your hob is not heating up, check if it is properly plugged in and that the circuit breaker is not tripped. If the problem persists, consult the user manual for troubleshooting tips or contact customer service.
To unlock the control panel, press and hold the lock button for a few seconds until the lock indicator light turns off. Refer to the manual for specific instructions if needed.
Use flat-bottomed cookware made of materials like stainless steel or cast iron. Ensure the diameter is appropriate for the hob zones to ensure efficient heating.
Installation should be performed by a qualified technician. Ensure the hob is placed on a stable, heat-resistant surface and connected to the appropriate electrical supply.
Error code E4 usually indicates a problem with the temperature sensor. Turn off the hob and restart it. If the error persists, contact customer support for assistance.
To prevent scratches, avoid sliding cookware across the surface and use mats or trivets under pots and pans. Regularly clean the surface to remove any debris that could cause scratches.
A buzzing noise may be normal due to the fan or induction elements working. If the noise is excessive or unusual, check if the cookware is properly centered and flat.
Power settings can be adjusted via the control panel. Use the increase/decrease buttons to set the desired power level for each cooking zone. Consult the manual for detailed instructions.
If the touch controls are unresponsive, ensure the surface is clean and dry. Restart the hob by turning it off and back on. If the issue continues, consult the user manual or contact support.