Candy CMD 64 X Instructions Manual
![Candy CMD 64 X manual cover](/images/SwjeHJGatVmkEsOyQpSAYIjG/thumbs/thumb175x175.webp)
Ensure the hood is securely mounted to the wall or cabinetry using the appropriate brackets and screws provided in the installation kit. Connect the hood to a power source and ensure the exhaust duct is properly aligned and sealed.
Check if the bulbs are correctly installed and not burnt out. If the bulbs are fine, inspect the light switch and wiring connections for any loose or damaged components.
Remove the grease filters from the hood and soak them in warm, soapy water. Gently scrub with a soft brush, rinse thoroughly, and allow them to dry completely before re-installing.
First, ensure that the hood is securely mounted. Check for any loose parts or objects obstructing the fan. If the noise persists, inspect the fan motor and blades for wear or damage.
Charcoal filters should be replaced approximately every 3 to 6 months, depending on usage frequency and cooking habits.
Ensure that the ductwork is not blocked or restricted. Clean or replace filters if they are dirty. Check the fan speed settings and verify that the exhaust flap is opening properly.
Yes, the Candy CMD 64 X Hood can be used in recirculation mode with the installation of charcoal filters to neutralize odors.
To reset the filter indicator light, press and hold the filter reset button for a few seconds until the light turns off.
Check the power connection to ensure the hood is receiving electricity. Inspect the control panel for any visible damage or debris. If necessary, perform a reset by disconnecting the power for a few minutes.
Use a soft cloth with a mild detergent or a stainless steel cleaner to wipe down the surface. Avoid abrasive materials to prevent scratching. Regularly polish with a stainless steel polish for added protection.