Candy CIN 100 T UK User Manual
![Candy CIN 100 T UK manual cover](/images/IMWRSHZPvRbYdoXpFoGJPUFx/thumbs/thumb175x175.webp)
To reset the Candy CIN 100 T UK washing machine, turn off the appliance, unplug it from the power source, wait for about 5 minutes, and then plug it back in. Turn on the machine and see if the issue persists.
Ensure the door is properly closed, check the power supply, and make sure the water tap is turned on. Also, verify that the selected program has been set correctly.
Check if the drain hose is kinked or blocked. Also, inspect the filter for any obstructions. Clean the filter and drain hose if necessary.
It is recommended to clean the filter every month to ensure optimal performance and to prevent blockages.
Ensure the washing machine is level on the floor and that all transport bolts have been removed. Also, check if the laundry is evenly distributed inside the drum.
Regularly clean the drum and door seal, leave the door slightly open after use to allow air circulation, and occasionally run an empty hot wash with vinegar or a washing machine cleaner.
Refer to the user manual to identify the specific error code and follow the recommended troubleshooting steps. Common issues may include drainage problems, door not closed, or water supply issues.
Yes, the Candy CIN 100 T UK has specific programs for delicate fabrics. Make sure to select the appropriate cycle and use a gentle detergent.
Check the hoses for any signs of wear or damage, ensure connections are tight, and inspect the door seal for cracks. Replace any faulty components as needed.
Make sure the load is balanced and not too heavy. Check if the spin speed is set correctly and verify that there are no obstructions in the drum or pump filter.