Candy CHCS 517FSWDK User Manual

To adjust the temperature settings, locate the control panel inside the fridge. Use the temperature control dial to select the desired cooling level. It is recommended to keep the fridge at 3°C for optimal freshness.
First, check if the refrigerator is plugged in and the power is on. Ensure that the door seals are clean and tight. If the problem persists, adjust the temperature settings or consult the user manual for further troubleshooting steps.
It is recommended to clean the condenser coils every six months to ensure efficient operation. Disconnect the power supply before cleaning and use a vacuum cleaner or coil brush to remove dust and debris.
Water pooling can occur due to a blocked defrost drain. Clear the drain by flushing it with warm water or using a pipe cleaner to remove any obstructions. Ensure regular cleaning to prevent future blockages.
To change the light bulb, first disconnect the refrigerator from the power source. Locate the bulb cover, usually at the top of the fridge compartment. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage.
Excessive frost can result from leaving the freezer door open for long periods. Ensure the door seals are intact and not obstructed by food items. Defrost the freezer manually if needed and adjust the temperature setting if necessary.
Store food in airtight containers and avoid overloading the fridge to allow proper air circulation. Keep raw meat on the bottom shelf to prevent dripping onto other foods, and ensure that dairy products are kept in a consistent temperature zone.
Yes, the door swing can be reversed. Refer to the user manual for detailed instructions, as it involves removing the door and reattaching it on the opposite side. Ensure you have the necessary tools and assistance if required.
To defrost the freezer, first remove all food items. Turn off the freezer and let the ice melt naturally. Use towels to absorb water and clean the interior with a mixture of baking soda and water. Turn the freezer back on once it is dry.
Ensure that the refrigerator is level and on a stable surface. Check for any loose components or items rattling on top of the fridge. If noise persists, consult the user manual or contact a service technician for further assistance.