Candy CFLE 5085W User Manual

To adjust the temperature settings, locate the thermostat dial inside the refrigerator. Turn the dial to the desired setting, with a higher number indicating a colder temperature. For optimal performance, set the refrigerator to a medium setting.
First, check if the refrigerator is plugged in and the power is on. Ensure that the thermostat is set to the correct temperature. Clean the condenser coils if they are dirty. If the problem persists, consider contacting a professional technician.
The Candy CFLE 5085W is a frost-free refrigerator, so manual defrosting is typically not necessary. However, if you notice ice buildup, it's a good idea to defrost it once a year or as needed.
To clean the interior, first unplug the refrigerator. Remove all food items and shelves. Use a soft cloth with mild soap and warm water to wipe down the surfaces. Rinse with clean water and dry thoroughly before replacing the shelves and food.
To change the light bulb, unplug the refrigerator first. Locate the light cover inside the fridge and remove it. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the light cover and plug the refrigerator back in.
Unusual noises may be caused by the refrigerator not being level. Ensure that it is on a flat surface and adjust the leveling legs if necessary. Other causes may include a vibrating part or a loose component. If the noise persists, consult a technician.
Inspect the door seal for any dirt or debris and clean it with a damp cloth. If the seal is damaged, it may need to be replaced. Ensure that the door is properly aligned. If the problem continues, seek professional assistance.
To maximize energy efficiency, keep the refrigerator away from heat sources and direct sunlight. Ensure that the door seals are tight and intact. Do not overcrowd the fridge to allow proper air circulation. Regularly clean the condenser coils.
Most refrigerators do not require a reset after a power outage. However, if the appliance is not working properly, unplug it for a few minutes and then plug it back in. Check if the settings are intact and adjust if necessary.
It is not advisable to store hot food directly in the refrigerator as it can raise the internal temperature, leading to food spoilage. Allow hot food to cool down to room temperature before refrigerating.