Candy CELDIMN 4S622PS User Manual
![Candy CELDIMN 4S622PS manual cover](/images/RCHIaGMlUFVknMkUDbfwxICi/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select your desired program using the control panel, and press the start button.
Check for clogs in the drain hose and ensure the sink drain is not blocked. Clean the filter and check the drain pump for obstructions.
To clean the filter, remove the bottom rack, twist and lift out the filter unit, and rinse it under running water. Reassemble and place it back in the dishwasher.
Error code E3 indicates a heating issue. Check the heating element and thermostat. If the problem persists, contact Candy customer support.
Regular maintenance should be done monthly. Clean the filter, wipe the door seals, and run an empty cycle with a dishwasher cleaner.
Ensure dishes are loaded correctly without blocking spray arms. Check that the water temperature is adequate and use the appropriate amount of detergent.
Use a rinse aid, ensure the dishwasher is not overloaded, select a drying program, and open the door slightly after the cycle for better air circulation.
Check for obstructions around the door, ensure racks are properly aligned, and inspect the latch for damage. Adjust or replace as necessary.
No, regular dish soap can cause excessive sudsing and damage your dishwasher. Always use detergent specifically designed for dishwashers.
Place silverware in the basket with handles facing down. Mix spoons, forks, and knives to prevent nesting and ensure thorough cleaning.