Candy CDSN 2D350PB User Manual
![Candy CDSN 2D350PB manual cover](/images/sMwTXJEcrHWtjrzuWpCSlaaA/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishwasher, add detergent, select your desired program using the program selection button, and press the start button.
Check if the dishwasher is properly plugged in, the door is securely closed, the water supply is turned on, and the selected program is appropriate. If the problem persists, consider checking the circuit breaker.
To clean the filter, remove the lower rack, unscrew the filter system from the bottom of the dishwasher, rinse it under running water, and then reassemble it back into place.
Ensure that the rinse aid dispenser is filled, and the selected program includes a drying phase. Also, avoid overloading the dishwasher and check if the heating element is functioning correctly.
Make sure to scrape off large food particles before loading, avoid overloading the dishwasher, use the recommended detergent, and regularly clean the spray arms and filters.
Error code E4 indicates a water overflow issue. Check for any leaks, ensure the drain hose is correctly positioned, and inspect the float switch for obstructions.
It is recommended to clean the spray arms every 3-6 months to ensure proper water flow and cleaning performance. Remove them and rinse under running water to clear any clogs.
Run an empty cycle with a dishwasher cleaner or vinegar, clean the filter and door seals, and ensure that food debris is removed from inside the dishwasher.
To reset the dishwasher, turn it off by pressing the power button, wait a few seconds, and then turn it back on. This can help to clear minor electronic glitches.
No, you should only use detergents specifically formulated for dishwashers. Regular dish soap can cause excessive suds and potentially damage the appliance.