Candy CDPN 1D640PW-80 User Manual
![Candy CDPN 1D640PW-80 manual cover](/images/ZNAUzwyZwojoKadgKPBskOUE/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select the desired program using the program selector, and press the start button.
Check if the drain hose is kinked or clogged. Ensure that the sink drain is not blocked. If the problem persists, clean the filter and pump area as they might be obstructed.
It's recommended to clean the filter once a month to prevent clogs and ensure optimal performance.
Unusual noises may be caused by items inside the dishwasher coming into contact with each other or the spray arms. Ensure dishes are properly loaded and check that the spray arms can rotate freely.
Use high-quality dishwasher detergents, which can be in the form of powder, gel, or tablets, suitable for automatic dishwashers.
Ensure that the rinse aid compartment is filled, use a drying cycle if available, and wait a few minutes before unloading to allow residual heat to dry the dishes.
Verify that the dishwasher is plugged in, the door is fully closed, and the water supply is turned on. Also, check the circuit breaker and ensure a cycle is selected.
To reset the dishwasher, turn off the appliance by pressing the power button, wait a few seconds, and then turn it back on. Alternatively, refer to the user manual for specific reset instructions.
Yes, but ensure the plastic items are labeled dishwasher-safe. Place them on the top rack to avoid exposure to the heating element.
Regularly clean the filter, check and clean the spray arms, inspect the door seal for debris, and run an empty cycle with a dishwasher cleaner to remove build-up.