Candy CDPMN4S622PX-ISR User Manual

To reset the dishwasher, press and hold the start button for about 5 seconds until the display turns off. Release the button and the appliance should be reset.
Check the drain hose for any kinks or blockages. Ensure that the sink drain is not clogged. Also, clean the dishwasher's filter and sump if necessary.
Remove the lower dish rack and locate the filter at the bottom of the dishwasher. Twist it counterclockwise to remove it, then rinse under running water to remove debris. Reinstall by twisting it clockwise.
Ensure that the rinse aid dispenser is filled. Check if the water hardness setting is correctly configured according to your local water supply.
Inspect the door seal for damage or dirt. Make sure the dishwasher is level and not overloaded. Check for any cracks in the hose connections.
Ensure the dishwasher is properly plugged in and the door is securely closed. Check the circuit breaker and ensure the dishwasher is not in delay start mode.
Regularly clean the filter and spray arms. Use a dishwasher cleaner monthly. Check and clean the door seal and ensure proper loading to avoid damage.
Ensure the dishwasher is level and properly installed. Avoid overloading and ensure that dishes do not touch each other. Inspect the spray arms for obstructions.
Clean the filter and check for food debris in the sump and spray arms. Run an empty cycle with a dishwasher cleaner to remove any lingering odors.
Refer to the user manual to enter the settings mode. Use the buttons to increase or decrease the hardness level according to your local water supply.