Candy CDPM 2T62W K User Manual
![Candy CDPM 2T62W K manual cover](/images/zrSnHdvNSQRSSydyQGdcgWVa/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select the desired cycle using the control panel, and press the start button.
Check for clogged filters or drain hose. Clean the filters and ensure the hose is not kinked or blocked. If the problem persists, consult the user manual or contact customer service.
Remove the bottom rack, turn the filter counterclockwise, and lift it out. Rinse under running water and use a brush to remove debris. Reinstall by screwing it back into place.
Regularly clean the filters, check and clean the spray arms, use dishwasher-safe cleaning agents, and run an empty hot wash cycle with vinegar monthly.
Unusual noises may be caused by items touching the spray arms or loose utensils. Ensure all items are properly loaded and not obstructing the spray arms.
To reset, turn off the dishwasher, unplug it for a few minutes, then plug it back in and turn it on. This can help resolve minor issues.
Ensure that dishes are loaded correctly, the spray arms are not blocked, and the proper amount of detergent is used. Check that the water temperature is hot enough for effective cleaning.
Check if the dishwasher is plugged in and the door is closed properly. Verify that the water supply is on and the control panel is responsive. If issues persist, consult the manual or a technician.
Ensure that the rinse aid dispenser is filled and that the selected program includes a drying phase. Allow the dishwasher to cool slightly before opening to let steam escape.
Use rinse aid to improve drying, choose a drying cycle, and open the door slightly after the cycle to let moisture escape. Ensure dishes are loaded to allow for proper air circulation.