Candy CDPE 6350-80 User Manual

To reset the Candy CDPE 6350-80 dishwasher, press and hold the start button for a few seconds until the control panel lights blink. Release the button, and the dishwasher should reset.
Check the dishwasher's filter and drain hose for blockages. Clean the filter and ensure the drain hose is not kinked or clogged. If the problem persists, inspect the drain pump for any obstructions.
Ensure that the rinse aid dispenser is filled, as rinse aid helps with the drying process. Also, use a higher temperature setting and ensure that dishes are loaded properly to allow air circulation.
Unusual noises may be due to items protruding from the racks and hitting the spray arms. Check that all dishes are properly loaded and that the spray arms can rotate freely.
Regularly clean the filter, check and clean the spray arms, and wipe the door seal. Additionally, run a cleaning cycle with dishwasher cleaner once a month to prevent buildup.
Error code E3 usually indicates a heating issue. Check if the water heater is functioning properly, and ensure the water supply is adequate. If the problem persists, contact a professional technician.
No, regular dish soap should not be used in a dishwasher as it can create excessive suds, leading to leaks and poor cleaning performance. Always use dishwasher-specific detergents.
To prevent odors, regularly clean the filter, ensure food debris is rinsed off dishes before loading, and occasionally run a wash cycle with a dishwasher cleaner or a cup of white vinegar.
Check for obstructions around the door or inside the latch mechanism. Ensure the dishwasher is level, as this can affect door alignment. If the issue continues, inspect the latch for damage or wear.
Load larger items like pots and pans on the bottom rack, and place smaller, more delicate items on the top rack. Ensure that items are not blocking the spray arms and that they have adequate space for water flow.