Candy CDP 6S3TAW-S User Manual
![Candy CDP 6S3TAW-S manual cover](/images/WJzXVYOQTbmWUvOaYKGoCxMF/thumbs/thumb175x175.webp)
To reset the Candy CDP 6S3TAW-S dishwasher, press and hold the start button for about 3 seconds until the indicator lights blink. This will reset the control panel and clear any errors.
Check for any blockages in the filter or drain hose. Clean the filter and ensure the hose is not kinked. If the problem persists, inspect the pump for obstructions.
No, you should only use detergent specifically designed for dishwashers. Regular dish soap can cause excessive suds and overflow.
The filter should be cleaned at least once a month to ensure optimal performance and to prevent odors and clogs.
Eco mode is an energy-efficient setting that uses less water and electricity. It may take longer to complete a cycle but is better for the environment.
Spots can be caused by hard water. Ensure you are using a rinse aid and check the water hardness settings on your dishwasher. Adjust as necessary.
Ensure that you are using a rinse aid, select a higher temperature setting if available, and avoid overloading the dishwasher to improve airflow.
Check for any loose items or utensils that might be hitting the spray arms. Ensure the dishwasher is level and inspect the pump for debris.
Place large items like pots and pans on the bottom rack, ensuring they do not block the spray arms. Adjust the upper rack if needed for better accommodation.
Regularly clean the filter, check and clean the spray arms, use a dishwasher cleaner monthly, and inspect the door seal for any damage or debris.