Candy CDP 1LS57B-80 User Manual

To reset the dishwasher, press and hold the start button for about 3 seconds until the display shows a reset signal or the lights blink. Then, release the button and restart the dishwasher.
Check if the drain hose is kinked or clogged. Ensure that the sink's drain is not blocked. Clean the dishwasher's filter and remove any debris. If the problem persists, consult the user manual or contact customer service.
Ensure that you use a rinse aid, as it helps water to sheet off dishes for better drying. Make sure the dishwasher is not overloaded, and use the appropriate drying cycle for optimal results.
Error code E4 typically indicates a water overflow issue. Check for blockages in the filter, ensure the water supply is not excessive, and inspect the float switch for any malfunctions.
It is recommended to clean the dishwasher filter at least once a month to ensure optimal performance and prevent clogs.
Unusual noises may be due to items in the dishwasher touching or the spray arms hitting dishes. Ensure that all items are loaded correctly and that the spray arms can rotate freely.
No, you should not use regular dish soap in your dishwasher as it can cause excessive suds and overflow. Always use detergent specifically designed for dishwashers.
Refer to the user manual to access the settings menu. Use the control panel to adjust the water hardness level according to your local water supply and the manual's instructions.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, inspecting the door seal for debris, and ensuring the detergent dispenser is functioning properly.
To prevent odors, clean the filter regularly, ensure that food particles are rinsed off dishes before loading, and run a cleaning cycle with a dishwasher cleaner monthly.