Candy CDP 1DS36WZ-19 User Manual
![Candy CDP 1DS36WZ-19 manual cover](/images/IOGBULxTZKiGHUaWBaZrcxQG/thumbs/thumb175x175.webp)
To reset the dishwasher, turn it off using the power button, unplug it from the power source, wait for about 1 minute, and then plug it back in. Turn the dishwasher on and select a new cycle if needed.
Check the drain hose for any kinks or blockages. Ensure the filter is clean and not obstructed. If the problem persists, inspect the drain pump for any debris or damage.
To clean the filter, remove the bottom rack to access the filter at the base of the dishwasher. Twist and lift out the filter, rinse it under warm water, and remove any food particles or debris. Reinstall the filter by placing it back and twisting it securely in place.
Check for any loose items inside the dishwasher that might be rattling. Ensure that dishes are properly loaded and not touching each other. Inspect the spray arm for obstructions or damage.
Ensure that the spray arms can rotate freely and are not blocked by large dishes. Check that the detergent dispenser is not jammed. Use the correct amount of detergent and ensure the water temperature is at least 120°F (50°C) for optimal cleaning.
Inspect the door gasket for wear or damage and replace it if necessary. Ensure the dishwasher is level and not tilting. Check the water inlet and drain hoses for any leaks or loose connections.
Regularly clean the filter, check and clean the spray arms, inspect and clean the door gasket, and run a cleaning cycle with dishwasher cleaner to remove buildup and odors.
Use a rinse aid to enhance drying performance. Ensure that the dishwasher is loaded correctly to allow air circulation, and use the heated drying option if available.
Error code E4 typically indicates a water overflow issue. Check for any blockages in the drain hose and ensure the dishwasher is draining properly. If the problem persists, consult the user manual or contact a service technician.
Place larger items like pots and pans on the bottom rack and smaller items such as cups and glasses on the top rack. Ensure that items do not block the spray arms and avoid overcrowding to allow water circulation.