Candy CDIN 4S532PS E User Manual

To reset the dishwasher, press and hold the start/pause button for about 3 seconds until the indicator lights flash. Then, release the button and select the desired program.
Ensure the drain hose is not kinked or blocked. Check the filter and drain pump for any debris. Clean them if necessary to improve drainage.
Remove the lower basket and unscrew the filter unit by turning it counterclockwise. Rinse the filter under running water to remove debris, and reassemble it before placing it back in the dishwasher.
Use dishwasher-specific tablets, powder, or gel for optimal cleaning results. Ensure the detergent is suitable for automatic dishwashers.
Make sure to use the correct amount of rinse aid and adjust the rinse aid dispenser if necessary. Check that the water hardness setting is correctly configured.
Clean the spray arms every 1-2 months or if you notice reduced cleaning performance. Remove them and rinse under water to clear any blockages.
Regularly clean the filter and door seals. Run an empty hot wash cycle with a cup of white vinegar placed in a bowl on the top rack to remove odors.
Check for any loose items in the dishwasher that may be causing noise. Ensure the dishwasher is level and that the spray arms can rotate freely without obstruction.
Make sure to use rinse aid and select a drying program if available. Ensure that the dishes are loaded correctly and that there is sufficient space for air circulation.
Check that the dishwasher door is fully closed and latched. Ensure that the appliance is plugged in and that the circuit breaker has not tripped.