Candy CDIN 2D620PB User Manual
![Candy CDIN 2D620PB manual cover](/images/YQhVXcGmIlvqPatIDmPLiBMi/thumbs/thumb175x175.webp)
To reset your Candy CDIN 2D620PB dishwasher, press and hold the start button for about 5 seconds until the indicator lights begin to flash. This will reset the dishwasher to its default settings.
If your dishwasher is not draining, check the filter and drain hose for any blockages. Make sure the drain hose is not kinked and that the sink drain is clear. Clean the filter and ensure the pump cover is correctly secured.
To clean the filter, remove the lower rack and locate the filter at the bottom of the dishwasher. Twist the filter counterclockwise and lift it out. Rinse it under warm water to remove debris, then replace it by aligning it and twisting it clockwise.
If dishes are left wet, ensure the rinse aid dispenser is filled and that you are using a suitable drying program. Check that the dishwasher is not overloaded and that items are placed correctly to allow water to drain.
To adjust the rinse aid setting, open the rinse aid dispenser and turn the dial to increase or decrease the amount dispensed. The factory setting is usually set to 3, but you can adjust it based on your needs.
The error code E3 indicates a heating fault. Check that the water supply is connected and that the inlet hose is not kinked. If the problem persists, it may require professional service to check the heating element.
Spray arms should be cleaned every 1-3 months, depending on usage. Remove the spray arms and rinse them under warm water, using a brush to clear any blockages in the nozzles.
The Candy CDIN 2D620PB offers various programs including Eco, Intensive, Universal, and Rapid Wash. Each program is designed for different load types and levels of soiling.
Yes, you can clean pots and pans using the Intensive program, which is designed for heavily soiled items. Ensure pots and pans are properly loaded without blocking the spray arms.
If your dishwasher is noisy, check for loose items in the machine and ensure the spray arms are not obstructed. Verify that the dishwasher is level and that it is not overloaded.