Candy CDIN 2D360PBR User Manual

To reset your Candy CDIN 2D360PBR dishwasher, press and hold the start button for about 3-5 seconds until the display shows a reset or the lights blink. This will reset the current cycle.
If your dishwasher is not draining, check if the drain hose is kinked or blocked. Also, inspect the filter and pump for clogs. Clean any debris and ensure the drain hose is properly connected.
To improve drying, ensure that you are using a rinse aid, which helps in the drying process. Additionally, select the appropriate drying cycle and ensure the dishwasher is not overloaded.
White film can be caused by hard water. Use a high-quality detergent and ensure the use of rinse aid. Occasionally, run the dishwasher empty with a dishwasher cleaner to remove mineral buildup.
It is recommended to clean the filter once a month to ensure optimal performance and avoid blockages. Simply remove, rinse under warm water, and replace.
Check if the racks are properly aligned and not overfilled. Inspect the latch mechanism for any visible damage or obstructions. If the problem persists, consult a technician for further assistance.
Regularly clean the filter and door seals, and ensure dishes are rinsed before loading. Occasionally run an empty cycle with a dishwasher cleaner or a cup of vinegar to eliminate odors.
Ensure that dishes and utensils are properly loaded and not touching each other. Check for foreign objects in the spray arms or pump area. If the noise persists, seek professional support.
Refer to the user manual to adjust the water hardness settings. Usually, this involves navigating the control panel menu to set the water hardness level according to your local water supply.
Ensure that the spray arms can rotate freely and are not blocked. Check that you're using the correct amount of detergent, and the water inlet valve is functioning properly. Also, make sure the dishwasher is not overloaded.