Candy CDIMN 4S622PS E User Manual
![Candy CDIMN 4S622PS E manual cover](/images/kmBDlyRorldsprUpOmekmwCR/thumbs/thumb175x175.webp)
To reset the dishwasher, press and hold the start button for about 3 seconds until the display shows a reset message or icon. Release the button, and the dishwasher will reset.
Check the drain hose for kinks or clogs, ensure the sink drain is clear, and inspect the dishwasher filter for debris. Cleaning these components usually resolves drainage issues.
Remove the lower dish rack to access the filter. Turn the filter counterclockwise to remove it. Rinse under running water to remove debris, and use a soft brush if necessary. Reassemble and install the filter back into the dishwasher.
Spots may be due to hard water. Use a rinse aid to help prevent this. Ensure that the detergent is suitable for your water hardness and that you are using the correct amount.
Ensure that the rinse aid dispenser is full, select a higher drying setting if available, and open the door slightly after the cycle to allow steam to escape and improve drying.
Refer to the user manual for specific error codes and their meanings. Common solutions include checking water supply, ensuring proper drainage, and resetting the appliance.
It's recommended to clean the dishwasher's filter and spray arms monthly. Additionally, run an empty cycle with a dishwasher cleaner or vinegar every 1-2 months to keep the interior fresh.
Yes, but ensure that plastic items are dishwasher-safe and placed in the top rack to avoid warping from the heating element at the bottom.
Load larger items like pots and pans on the bottom rack, and smaller items like glasses and cups on the top rack. Ensure that items do not block spray arms and that they are angled correctly for water flow.
Ensure that the dishwasher is level and that no items are protruding from the racks. Check that the spray arms are not obstructed by dishes and that the filter is clean.