Candy CDIMN 4S613PS User Manual
![Candy CDIMN 4S613PS manual cover](/images/LXDUSTbsqQmoiaYuySOwHtPI/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select your desired wash program using the control panel, and press the start button.
Check for blockages in the drain hose, filter, or sink connection. Ensure the drain hose is not kinked and clean the filter if necessary.
To clean the filter, remove the lower rack, twist and pull out the filter assembly, rinse it under running water, and then reinstall it securely.
Ensure you are using the correct amount of detergent and that your rinse aid dispenser is filled. Also, check if the water hardness setting is correct and adjust if needed.
To reset the dishwasher, press and hold the start button for about 3 seconds until the control panel lights flash. This will cancel the current cycle and reset the machine.
Regularly clean the filter, check and clean the spray arms, wipe the door seal, and run an empty cycle with a dishwasher cleaner to remove buildup.
Unusual noises could be due to items in the dishwasher hitting the spray arms, loose cutlery, or a clogged filter. Ensure items are properly arranged and check the filter.
Ensure the rinse aid dispenser is filled, use the appropriate drying setting, and open the door slightly after the cycle to allow moisture to escape.
Check for obstructions like protruding utensils or racks. Also, ensure that the door latch is clean and not damaged.
Ensure the door is closed securely, check the power supply, make sure the water supply is turned on, and verify if the selected cycle requires additional input.