Candy CDIMN 4D622PB User Manual
![Candy CDIMN 4D622PB manual cover](/images/rvtNfOzmFZreAgQwqdDCMgTR/thumbs/thumb175x175.webp)
To load dishes properly, ensure that larger items like pots and pans are placed on the sides and back, allowing water to reach all surfaces. Place glasses and small dishes on the top rack, and ensure nothing blocks the spray arms. Avoid overcrowding to ensure efficient cleaning.
Check the filter and remove any debris. Inspect the drain hose for kinks or blockages. Ensure the sink's drain is clear. If the problem persists, contact a technician as there could be a pump or motor issue.
To clean the filter, remove the bottom rack and locate the filter at the base of the appliance. Twist the filter counterclockwise and lift it out. Rinse it under running water to remove debris, then replace it by twisting it clockwise until secure.
Regularly clean the filter and spray arms, use a dishwasher cleaner monthly, and ensure the water softener is properly set. Avoid overloading the machine and use the recommended amount of detergent.
Unusual noises can be caused by items touching the spray arms or dishes rattling against each other. Check the load and adjust as necessary. If the noise persists, inspect the spray arm and pump for obstructions.
Ensure the door is closed securely and the latch is engaged. Check the power supply and that the dishwasher is plugged in. Confirm that the water supply is turned on. If the issue continues, inspect the control panel for error codes.
Use detergents specifically designed for dishwashers. Avoid using dish soap or hand soap as they can cause excessive suds. Dishwasher salt and rinse aid are also recommended for optimal performance.
Ensure the rinse aid dispenser is full, and adjust the rinse aid setting if necessary. Select a wash program with a higher temperature for improved drying results. Check that the water softener setting matches the hardness of your water supply.
Inspect the door gasket for damage and ensure it is clean. Check the detergent dispenser for blockages and ensure the dishwasher is level. Tighten any loose hose connections. If the leak persists, professional service may be required.
To reset the dishwasher, turn it off and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on. This can help clear minor errors or glitches in the system.