Candy CDI 1L38 T User Manual
![Candy CDI 1L38 T manual cover](/images/yoIQjhLSXYzwxRMJpIqsaFrE/thumbs/thumb175x175.webp)
To reset the Candy CDI 1L38 T Dishwasher, press and hold the start button for approximately 5-10 seconds until the LED indicators flash, indicating the reset process has been initiated.
If the dishwasher does not start, ensure it is properly plugged in, the door is securely closed, and the water supply is turned on. Also, check for any error codes displayed and refer to the user manual for specific troubleshooting steps.
To clean the filter, remove the lower dish rack. Twist the filter counterclockwise and lift it out. Rinse it under running water and clean off any food debris before reinserting it into the dishwasher.
Ensure that the rinse aid dispenser is full, as rinse aid helps in the drying process. Also, check that the selected wash cycle includes a drying phase and that the dishes are loaded correctly to allow proper air circulation.
Error code E1 typically indicates a problem with the water supply, such as a blocked or kinked hose. Check the water inlet and ensure that the tap is open.
Regular maintenance should be performed monthly, including cleaning the filter, checking the spray arms for blockages, and wiping down the door seals to prevent mold growth.
It is recommended to use high-quality, dishwasher-specific detergents in either tablet, powder, or gel form. Avoid using regular dish soap as it can cause excessive sudsing.
Refer to the user manual to access the settings menu. Use the control panel to adjust the water hardness level according to the hardness of your local water supply, ensuring optimal washing performance.
Clean the filter and the spray arms, and run an empty cycle with a dishwasher cleaner or a cup of white vinegar placed on the top rack to eliminate odors. Ensure dishes are rinsed before loading to prevent food buildup.
Yes, but ensure that the plastic items are dishwasher-safe and place them on the top rack to avoid direct exposure to the heating element, which could cause warping.