Candy CDCP 8 User Manual

Ensure that dishes are not blocking the spray arms, place larger items at the sides and back, and ensure that all surfaces are exposed to the water spray. Avoid overloading the dishwasher to allow water to circulate freely.
Check for clogs in the filter or drain hose, ensure that the drain hose is not kinked, and make sure the kitchen sink drain is not blocked. Clean the filter regularly to prevent clogs.
To reset the dishwasher, press and hold the start button for a few seconds until the control panel resets. Refer to the user manual for specific instructions if needed.
Use a high-quality dishwasher detergent that is suitable for use in dishwashers. Both powder and liquid detergents are generally compatible, but check the manufacturer's recommendations for best results.
It is recommended to clean the filter once a month to ensure efficient operation and to prevent clogs and odors.
Ensure that you are using the correct amount of dishwasher detergent and rinse aid. Check if the water softener setting is appropriately adjusted if you have hard water.
Check if the door is properly closed and latched. Ensure that the dishwasher is plugged in and that the circuit breaker has not tripped. Verify that the water supply is turned on.
Yes, you can wash plastic items, but place them on the top rack to prevent them from melting or warping. Ensure that they are dishwasher safe.
Regularly clean the filter, check and clean spray arms, wipe the door seal, and run an empty cycle with vinegar to remove buildup.
Clean the filter regularly, ensure that food particles are rinsed off dishes before loading, and occasionally run an empty cycle with a dishwasher cleaner or vinegar.