Candy CD 122 J-80 User Manual
![Candy CD 122 J-80 manual cover](/images/rObPmibTNizRYIoiqLadMssH/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select the desired wash program using the program selector dial, and press the start button.
Check that the water supply is turned on, the inlet hose is not kinked or blocked, and the water inlet filter is clean. Ensure the door is fully closed.
Remove the bottom rack, locate the filter at the base of the dishwasher, twist it counterclockwise to remove, rinse under running water, and reinstall by twisting clockwise.
Place large items and pots in the bottom rack, smaller items and glasses in the top rack, and ensure that nothing blocks the spray arms. Avoid overloading for better results.
Ensure that no dishes or cutlery are touching the spray arms, check for any loose items in the dishwasher, and inspect the filter and pump area for obstructions.
Regularly clean the filter system, wipe down the door seals, run a cleaning cycle using dishwasher cleaner, and check the spray arms for blockages.
To reset, turn off the dishwasher, unplug it from the power supply, wait for a few minutes, then plug it back in and restart the machine.
Check the drain hose for blockages or kinks, ensure the filter system is clean, and verify that the drain pump is functioning correctly.
It is recommended to use dishwasher-specific detergents. Avoid using regular dish soap as it can cause excessive suds and damage the machine.
Ensure proper loading, use the recommended amount of detergent, check and clean the spray arms and filter, and choose an appropriate wash cycle for the soil level.