Candy CBWM 916TWH-80 User Manual
![Candy CBWM 916TWH-80 manual cover](/images/GgWYhTCYexOmJxYAARfbiKoM/thumbs/thumb175x175.webp)
To reset your Candy washing machine, turn the program selector to the off position, wait a few seconds, and then select your desired program again. If the issue persists, try unplugging the machine for a few minutes before plugging it back in.
Check if the drain hose is kinked or blocked. Ensure that the pump filter is clean. If the problem continues, there may be an issue with the pump that may require professional assistance.
Remove the detergent drawer by pulling it out and pressing down on the release mechanism. Wash it under running water to remove any residue. Use a soft brush if necessary, then dry it thoroughly before reinserting.
Regularly clean the detergent drawer and the pump filter. Check and clean the door seal, and run a maintenance wash cycle with a washing machine cleaner once a month to prevent odors and buildup.
Ensure that the machine is level and that all transit bolts have been removed. Check that the load is balanced and not too large or small. Adjust the feet if necessary to stabilize the machine.
Keep the door slightly open when not in use to allow air circulation. Regularly clean the drum and the detergent drawer, and run a hot wash cycle with a machine cleaner periodically.
Check if the machine is still in a cycle or if there is water inside. If so, try running a drain program. Wait a few minutes after the cycle ends to allow the lock to release. If the problem persists, it might require a technician's assistance.
Check if the power supply is stable and that there are no interruptions. Inspect the water inlet and drain hoses for blockages. If these are fine, consider resetting the machine and trying the cycle again.
Distribute clothes evenly around the drum for balanced loads. Avoid overloading, and mix large and small items to improve washing efficiency. Ensure that items are not tangled together.
Ensure that the water supply is turned on and that the hose is not kinked. Check the inlet filter for blockages. If the problem persists, there might be an issue with the water inlet valve needing professional attention.