Candy CBWD 8514TWH-80 User Manual
![Candy CBWD 8514TWH-80 manual cover](/images/IMmPgFDClCJMpdUPzCRJpZrn/thumbs/thumb175x175.webp)
To reset the Candy CBWD 8514TWH-80 dryer, unplug the machine from the power source for at least 5 minutes. Then, plug it back in and turn it on. This should reset the system.
If your dryer is not starting, ensure the door is properly closed. Check the power supply and ensure that the plug is securely inserted into the outlet. Additionally, inspect the fuse box or circuit breaker for any tripped switches.
If the dryer is not heating, check if the filter is clean and the vents are not blocked. Also, inspect the thermostat and heating element for any faults. If necessary, consult a professional technician.
To clean the lint filter, open the door and remove the filter from its slot. Use your fingers or a soft brush to remove any lint. Wash the filter under warm water if needed and allow it to dry completely before reinserting.
Regular maintenance for the Candy CBWD 8514TWH-80 includes cleaning the lint filter after each use, checking and cleaning the venting system periodically, and inspecting the drum and seals for any wear or damage.
To prevent shrinking, use the appropriate drying cycle for the fabric type. Consider using a lower heat setting or the air dry option for delicate items. Always follow the garment care instructions on the labels.
For optimal drying, do not overload the dryer. Allow enough space for clothes to tumble freely. Mix large and small items in the same load to improve drying efficiency and balance the load.
Unusual noises can be caused by loose items in the drum, such as coins or buttons. Also, check if the dryer is level and stable. Inspect the drum rollers, idler pulley, and motor bearings for wear and replace them if necessary.
Refer to the user manual to understand the different drying cycles available. Select the cycle that matches the fabric type and desired dryness level. Use the control panel to make your selection before starting the dryer.
If the dryer stops mid-cycle, check if there is a power interruption. Examine the circuit breaker and ensure the dryer is still plugged in. Inspect the door latch to ensure it is secure, and try restarting the cycle.